Grind Number: XA218/330-XA228/325-14+5Hydraulic Roller CamshaftAggressive PerformanceDuration at .050": 218/228114 Lobe Center Angle with a 109 Intake CenterlineLift with 1.8 Rocker Arm Ratio: .594"/.585"Recommended Displacement: 6.2 Liter EnginesCylinder Heads: Gen 5 LTRecommended Compression Ratio: 9.50-10.5:1Recommended Headers: Stock Manifolds, 1 3/4" - 1 7/8" HeadersRecommended Stall Converter: StockRecommended Rear Axle Ratio: 2.85-3.90NOTE: Requires use of Cam Motion VVT Phaser 4 degree Limiter Block

The TITAN I Gen 5 LT camshaft is designed for mild street performance in cars using 6.2 liter LT engines. The TITAN I Gen 5 LT cam will have a mild performance idle and strong low end to midrange power. This camshaft will work well in completely stock vehicles but will enjoy performance benefits when used with headers, high flow exhaust and increased stall speed torque converter and high flow intake systems.

If you are looking for a great mild performance cam that you can daily drive, this camshaft is a great choice.

The TITAN series cams are designed with our renowned smooth cam lobe design that provides quiet valve train operation and excellent upper rpm stability. Cam Motion offers this cam in 5150 steel alloy camshaft cores.

NOTE: This camshaft is designed to be used with our 4 degree phaser limiter installed. Failure to use this method can result in poor performance and serious engine damage. For more information, contact Cam Motion technical support.

NOTE: All Cam Motion Gen 5 LT camshafts require the deletion of the AFM/DOD function. This will require our AFM/DOD Delete KitAFM/DOD Delete Kit